can-I-change-just-one-axle

Can I Replace Just One Trailer Axle, or Should Both Axles Be Changed?

Yes, only one trailer axle be changed, but it’s often easiest to replace both axles at the same time. Yes, you can switch axles for longer lengths, but there is a caveat. Let’s find out about axle replacements. 

  It’s never great when things wear out but replacing parts for anything remains a difficult task. Axles have always been a mystery due to the many inputs required to ensure the correct replacement axle for your trailer.  

Axle lengths must be the same.

A perfect match is hard to find. If you’ve bent one trailer axle and visited a mechanic to find a match, the problem is that trailer axle designs come and go. If your trailer is a bit older, you’ll likely find an axle that is slightly shorter or longer than what you require. Using an axle with different dimensions from the other means you’ll have tracking issues and irregular tire wear. Read our article ‘How to Measure The Proper Size Trailer Axle to Buy.’  

How do you measure an axle to make sure that you get the exact same size? You’ll need three measurements: spring-centre-to-spring-centre, hub-face-to-hub-face, and tube diameter. 

Get help from our knowledgeable staff. See our great Google reviews.

  Axle weight ratings should be the same on both axles, especially if your axles are torsions. Changing only one trailer axle with a different weight rating from the other puts at risk a load carrying differently or how each axle takes the load, affecting your tire and tongue wear. Torsion axles require the weight rating to be exactly the same on each axle; if the replacement has a different weight rating, the dissimilar angles will give you two axles at different heights and cause problems.  Spring axles with a walking beam setup are more forgiving with heights than torsion axles; the replacement should match in weight ratings or at least be a heavier-rated axle.   

Leaf spring axles rarely need axle replacement.

Because the leaf springs are separate from the axle, it is usually only the leaf springs that need replacement. Read our helpful article, ‘Should Trailer Axles be Straight or Curved – What Are Spring and Torsion Axles?’  

Yes, you can upgrade both axles for longer axles, with a big but.

The length of your axle determines the width of your trailer. You can replace existing axles with longer hub face versions which would allow it to carry a heavier weight.   

Remember that you can only upgrade a weight rating to the lowest-rated component, which may not be the axle. More on this is in the highlighted article-to-read above.

  If you recall the three measurements needed regarding replacement axles, you’ll need to ensure the spring centre-to-spring-centre measurement is wide enough to handle the longer hub face. Also, you may need different wheels and tires rated for heavier weight.   

It is always safest and easiest to replace both axles at the same time.

Although it is unnecessary to change both, axles are not hugely expensive to replace; changing both will give you peace of mind knowing nothing different is introduced. See our axle order page here. We carry Dexter, Kodiak, UFP, Rockwell American axles, and Titan, Tie Down, and Al-Ko parts.  Maybe you’d be interested in a set of our Clearance Axles.  

Please call Standard Axle at (519) 451 1116, where our professional staff will help you with your axle measurements. We can even build custom-made assembly spring axles. (A custom torsion axle can also be built off-site.)